Home

About Us: Quality Systems:  Mfr. Facilities: Third Party inspectionContact us

                                  Product Index 

 

                             News Updates

 

 

    Vast Range of Products Manufactured by us


 

     

 

Micro,s Valve Manifolds have been in use since 1968 in a number of Refineries, Chemical , Petro –Chemical , Fertilizer power plants, steel plants and other process Industries, MIRCO offers a complete range of 2&3 valve manifolds. This Manifolds are rugged in construction to withstand high pressure and temperatures. These Valve Manifolds are rated for pressures as high as 6000 PSI at 2000 degs. F. or 4000 PSI at 500 degs. F with PTFE packing. For higher temperature Grafoil packing for used.
 
 

M3VM10 series  of Valve Manifolds (“PIPE END”type Manifolds) are designed to be mounted with impulse Piping  from a remote field meter or D.P. Transmitter. This Manifold has two block Valves and one equalishing Valves. The intel  and outlet connections are ” NPT (F) and two ” NPT (F) purge connections with Plugs are standard with these units. 

 

 
 
   
 



M3VM20
series  of Valve Manifolds (“H” type manifolds) consist of two block (shut Off) Valves and one equalizing Valve. These manifolds are flanged on both side for mounting directly to D.P. Transmitters having 54mm (2-18”) center to center connections. Any other center to center distance also available on special  order. The oval flanges supplied with the D.P. Transmitters are used on the process side of these Manifolds for piping connection. This model provides easy installation and comes complete with found mounting bolts and two PTFE “o” rings for ready installation. Two nos. ” NPT (F) purge connection are standards with this units.

 
 
   
 



M3VM30
series of valves Manifolds (“T” type Manifolds consist of two Block (Shut Off) valves and one equalizing valve. These valve are flanged on one side for mounting directly to D.P. Transmitters having 54mm (2-1/8/”) center to center distance. Any other connection are provided for tubing / piping into the process side two ”  NPT connections are provided for tubing /Piping into the process taps. This model comes complete with four mounting bolts and two PTFE “O” rings for ready installation. Two nos. ” NPT (F) purge connection are standard with these units.

 
 

 

                                                                   

 

 

          Home | About Us|  Quality Systems  |  Mfr. Facilities | Third Party inspection  | Contact us

 

 

   Powered by khushitech     Check Webmail

           Recommended Settings